MJA39TB-50 Accelerometer sensor

1. Strong structure, low power consumption, excellent deviation stability
2. TTL output,50G measurement range


Model MJA39TB-50
Measuring range ±50G
Deviation calibration <5mg
48h deviation stability <2mg(Typical value)
Measuring axis X,Y,Z
Annual deviation stability 7.5Mg Typical value(<25)
power on/off repeatability <10mg(MAX)
Deviation temp. coefficient 0.5mg/℃ Typical value ±2mg/℃ MAX
Annual scale factor stability 300(<1000)ppm Typical value
Resolution/threshold(@1Hz) <5mg(MAX)
Nonlinear <0.5%FS(MAX) <0.09g(MAX)
Bandwidth(4) 1~≥400Hz
Resonance frequency 6.7kHz
Output resistance/load Min 10KΩ,as Vout(Pin 32)&VAGND(Pin 38)max 50pF,
as Vout(Pin 32);& max 100F ,as VAGND(Pin 38)
Shock(g) 20g rms,20~2000Hz
(Random noise, o, p, I each shaft effect 30min)
Reliability MIL-HDBK-217,Grade two
Operating current consumption <3mA@12V DC
Scale factor temp. coefficient 100ppm/℃(Typical value) -50/250(Min/Max value)
Impact resistant 100g@11ms,Times/Axis(half sinusoid)
Recovery time <1ms(1000g,1/2 sin 1ms,impact in/shaft)
Output current consumption 4~20mA@12V DC input voltage (%FS)
Operating temperature -40℃~+85℃
Output rate 5Hz, 15Hz, 35Hz, 50Hz, 100Hz can be set
Output signal TTL
Output voltage range 0~5V DC@12V DC
LCC sealed Meet MIL-STD-833-E
Input(VDD-CSS) 9-36V DC
Weight 100g
Dimension L47*W47*H38mm

Copyright © 2012-2017 Akusense Technology Co., Ltd. All Rights Reserved

Technical support:CTMON