PG1-P Fiber Amplifiers

1.Operating voltage:12~24V DC±10% 2.PNP open-collector

Model PG1-P
Light source Red, 4-element LED body
Reaction time SHSP:13μs FINE:30μs,SUPR:100μs TERA:200μs
Output selection LIGHT-ON/DARK-ON (short press MODE and select with UP DOWN)
Display indicator Operation indicator: Red LED, dual digital monitor: Dual 7-digit display, threshold (4-digit green LED indicator) and current value (4-digit red LED indicator) lit together. Current value range: 0-9999
Detection method Light intensity (area detection is available for automatic sensitive tracking).
Delay function 1ms~9999ms
Control output NPN/PNP open collector 24V, max. 100mA (only for main components, max. 20mA (residual voltage: 1V when expansion parts are connected)
Power supply 12 to 24VDC ± 10%, floating ratio (P-P): up to 10% Level 2
Working environment brightness Incandescent lamp≤20,000Lux,Sunlight≤30,000 Lux
Power Consumption Standard mode ≤300mW Max. voltage: 24V
Ambient temperature -10 to +55 ° C, no freeze
Vibration resistance 10 to 55 Hz, double amplitude: 1.5 mm, X, Y, Z three directions, 2 hours each





Copyright © 2012-2017 Akusense Technology Co., Ltd. All Rights Reserved

Technical support:CTMON