AKUSENSE

Positioning

Sectors Filter

3C Electronics
New energy
Semiconductor
logistics
Automobiles

Position control of the mechanism module

It is widely used in multiple points inside the machine to control the origin and limit position of the mechanism module, and control the position of the roller

Limit the position of movement of the cylinder connecting rod

The proximity switch is used to detect the up and down movement of the cylinder connecting rod to limit the position.

Control the origin and limit position of the top mechanism

After the material box comes from the transmission line, it arrives at the loading station, and the motor moves the upper material box jig to a predetermined position. During this process, the proximity switch controls the origin and limit position of the upper mechanism.

Cylinder module upper limit

Applied to the upper limit of the cylinder module, the magnetic sensor detects the position of the cylinder to control the lifting and falling of the cylinder.

Detect cylinder position

Applied to the upper limit of the cylinder module, the magnetic sensor detects to control the cylinder position.

Position and limit of the motion mechanism module

It is applied to position the limit of the motion mechanism module.

Position control such as positioning limit of the motion mechanism module

The motion mechanism of the equipment is complex, and slot sensors with a variety of housing are commonly used in multiple stations of the equipment to perform position control such as positioning and limiting of the motion mechanism module.

Stamping crank positioning detection

A contact sensor is used to detect the positioning of the stamping crank.

Positioning of safety door of CNC machine tool

Use the contact sensor to detect the position of the safety door of the CNC machine tool to ensure that the safety door is closed when the machine tool is working.

Linear module origin detection

The linear sensor is used to detect the origin of the module, which is convenient for installation and accurate positioning.

Positioning of tiny square inductive cylinder

The use of tiny square inductors can detect heights up to 0.05mm The components, and have good repeatability.

Thrimble reset detection

use MR a series of contact sensors detect whether the ejector pin in the stamping die is reset.

Flexible cylinder positioning

In the process of picking and placing components, ultra-thin components are gradually superimposed, and the cylinder sensor can be used to detect Measuring height up to 0.05 mm The components, and have good repeatability.

Use diffuse reflection photoelectric inspection feed fixture

In industrial automation production lines, the restrictive position state of the feeder fixture is critical. With PM18 diffuse reflective photoelectric sensors,detects stablely the feeder fixture in place, thus preventing damage to expensive attachment heads.

Truck trailer positioning

The AS-21C LiDAR sensor can be used to scan the stack of containers under the gantry crane to lock the container grab point.

Accurate positioning of watch axis

Use the point laser sensor to position the scale of the dial to realize the precise assembly of the dial.

Using precision positioning sensor for glass substrate positioning

Measuring the basic flatness of glass.

Positioning of the mask in the vacuum film forming device

Realize flatness detection of photomask.

Position detection of fluorescent tube

Position the printed mark on the fluorescent tube to detect the electrode.

Opposite beam fiber inspection products are in place

Opposite optical fiber detection products in place.

Use diffuse reflection photoelectric detection chip

Use diffuse reflection photoelectric detection of wafers to determine the number of wafers.

Detect whether the wafers are placed accurately

Check whether the wafer placement is accurate

Detection the bulge of lithium batteries in production

During the battery bulge inspection process, the bulge height is detected to ensure that the batteries does not leak, blemish and avoid the defective products flow into the next step.