After the positive and negative materials are uniformly mixed by a vacuum mixer, they are stirred into slurry.
Detect the te mperature of the drying oven
The drying box is electrically heated, with uniform heating, precise temperature control and rapid drying.
Detection the bulge of lithium batteries in production
During the battery bulge inspection process, the bulge height is detected to ensure that the batteries does not leak, blemish and avoid the defective products flow into the next step.
Based on the characteristics and the high-precision requirements of the battery pole pieces, it is a relatively reliable solution to use a confocal displacement sensor. ADV series spectral confocal can be equipped with two
probes at the same time. It is the best choice for online beam detection of pole
piece and coating thickness, which is economical, stable and reliable.
In the process of processing the membrane into individual electrodes and separator plates, stress must be maintained on the membrane web. cylinder magnetic MR-C8 uses the position of the reversing roller to measure the film tension.
When replacing the roll, the end and the beginning of the two rolls that are next to each other should be connected with splicing tape. colour / the color mark sensor can stably detect the splicing tape so that it can be removed before the film is processed into units.
Multi-sheet detection of separator plate
Ultrasonic MUD series accurately detect the adjacent suspended electrodes and minimize defective products. Electrode and separation,The stacking of the device board is very important for the manufacture of battery cells.