Standard Dual Digital Fiber Amplifier
PE1
Models
PE1 Standard Dual Digital Fiber Amplifier PE1-N
- Response Time ：100㎲/400㎲/1.2ms/2.4ms/4.8ms
- Light Source：Red,modulated light(650nm)
- Switch Mode：L.on(light entry action)/D.on(shading action)can be switched
- Connection Method：2M/3 core cable 4mm diameter
- Protection Degree：IP50
Collection
Request a sample
Technical specifications
Size structure
Circuit diagram
Accessories
Applications
Customs data
| Model | PE1-N |
| Light Source | Red,modulated light(650nm) |
| Working Voltage | 12~24V DC |
| Working Current | ＜40mA |
| Output | NPN collector open |
| Switch Mode | L.on(light entry action)/D.on(shading action)can be switched |
| Display Screen | 7 sections of 8-digit display(red: 4 digits,green: 4 digits) |
| Response Time | 100㎲/400㎲/1.2ms/2.4ms/4.8ms |
| Caculater Function | Timer off,disconnect delay,turn on delay,single time(output delay mode) |
| Sensitivity Adjustment | Teach-in adjustment,manual adjustment |
| External Input Function | Timer off,disconnect delay,turn on delay,single time(output delay mode) |
| Hysteresis | ≤20%SN |
| Indicater | Work indicator: green; Action indicator: red |
| Residual Voltage | <1.5V(load current<100mA) |
| Maximum load Current | 100mA |
| Circuit Protection | Power supply reverse polarity protection,surge protection,short circuit protection |
| Ambient Circuit | operating time: 35%~85%RH,no freezing; storing time: 35%~95%RH |
| Ambient Humidity | operating temperature: -20℃~+50℃ no freezing,no freezing; storing time: -30~+70℃ |
| Insulation | 20MΩ |
| Pressure Resistance | ±1000V 50/60Hz 60s |
| Static Electricity | ±8000V(air discharge) |
| Group Pulse | ±2000V（5kHZ/50kHZ） |
| Ambient Illumination | Sunlight≤10,000 Lux,incandescent lamp≤3,000 Lux |
| Anti-Vibration | 10~50Hz,0.5mm; two hours each on the X,Y,and Z axes |
| Material | Case: PPE |
| Protection Degree | IP50 |
| Connection Method | 2M/3 core cable 4mm diameter |
Copyright © 2010-2023 AKusense All Rights Reserved